view cart | home | contact us | 619.501.2466

Ducati

 Catalog Home   View your cart   Proceed to Checkout 

Fast checkout through Google



Common Allen Sizes Used
SizeApplication
6mmFork bottom Monster/SS older
8mmFront caliper bolts
8mmFork bottom SBK
10mmOil drain
Common Torx Sizes Used
SizeApplication
T40S2R800 rotor bolts
Common Socket Sizes Used
SizeApplication
14mmFront axle ( 1991 to 1998 Monster & SS )
14mmOil screen ( 2001 and up models )
17mmFork cap, non-adj Showa ( Monsters and SS ) **
19mmFork cap, Marzocchi (new) ( 2003+ Monsters and SS )
22mmMonster rear axle nut ( up to 2002 model years )
22mmFork preload ( all with adjustable forks - Monsters, SS, SBK )
24mmS*R rearsets
28mmModern / SBK front axle nut ( all 748, 916, 996, 998, 2000 up Monster, 1999 up SS, Multistrada )
30mm2003+ Monster rear axle nut ( all 620, 800, 1000DS with double-sided swingarm )
30mm2002 Monster rear axle nut ( 750 and 900 with double-sided swingarm )
30mmFork cap, Marzocchi ( Monsters and SS/CR models up to 1999 ) **
30mmAlternator nut
32mmFork cap, adj Showa ( all with adjustable forks - Monsters, SS, SBK )
32mmClutch hub nut on Ducatis with dry clutches
32mmTesta and 1000DS countershaft sprocket nut
36mm749/999 rear axle nut
41mmSingle Sided Swingarm drive nut ( S2R, S4R, 748, 916, 996, 998, MH900e, Multistrada )
46mmSingle Sided Swingarm wheel nut ( S2R, S4R, 748, 916, 996, 998, MH900e, Multistrada )
55mmDucati 1098 and MV Agusta wheel nut
1-3/8"Nichols jamb nuts
 ** Notice there is overlap between these models!


Measuring/Precision Tools

descriptionfitmentpnprice 
Digital caliper, 6 All TL-1001 $35.00 add to cart 
Micrometer, outside, digital, electric All TL-1002 $129.00 add to cart 
Micrometer, outside, inch All TL-1003 $35.00 add to cart 
Micrometer, outside, metric All TL-1004 $105.00 add to cart 
Bore dial gauge All TL-1005 $130.00 add to cart 
Thread pitch gauge, metric All TL-1006 $6.00 add to cart 
Thread pitch gauge, standard All TL-1007 $6.00 add to cart 
Torque wrench, 20-200 in-lb, 3/8" All TL-1008 $36.00 add to cart 
Torque wrench, 10-150 ft-lb, 1/2" All TL-1009 $39.00 add to cart 
Valve feeler gauges All PC008052-4 $12.00 add to cart 
Master feeler gauge set All KD161 $10.00 add to cart 
Metric valve feeler gauges All 35-1770 $10.00 add to cart 
Battery load tester All TL-1078 $55.00 add to cart 
Multimeter All TL-1079 $24.00 add to cart 
Phase II dial indicator ( 0~1" x .001") All TL-1100 $25.00 add to cart 

Hand Tools

descriptionfitmentpnprice 
Hex Key Set All TL-1104 $6.00 add to cart 
T-handle ball allen ball/hex 8-piece set All TL-1026 $39.00 add to cart 
Fold-up allen set, plastic shell All TL-1025 $11.00 add to cart 
Magnetic retrieval tool All TL-1023 $6.00 add to cart 
Exhaust pipe end shaper All TL-1020 $31.00 add to cart 
Exhaust pipe stretcher All TL-1019 $36.00 add to cart 
EZ-out set, 5 bits/5 drills All TL-1018 $20.00 add to cart 
Hand impact All TL-1017 $33.00 add to cart 
Hammer, dead blow, 3 pc set All TL-1014 $19.00 add to cart 
Wheel bearing removal tool set (8 pc) All TL-1099 $49.00 add to cart 
Speedymoto Shock Service Tool All 04-0001 $54.00 add to cart 

Wrenches

descriptionfitmentpnprice 
22mm wrench (for Monster rear axle) All TL-1027 $25.00 add to cart 
30mm wrench (for 2003+ Monster rear axle) All TL-1028 $52.00 add to cart 
36mm wrench (for 749/999 rear axle) All TL-1029 $87.00 add to cart 
Wrench set, w/rack All TL-1030 $181.00 add to cart 
Wrench set, ratcheting w/tray All TL-1031 $152.00 add to cart 
Wrench set (30, 32, 34, 35, 36 mm) All TL-1032 $63.00 add to cart 
Wrench set w/pouch, (8-24mm, 17 pc) All TL-1033 $53.00 add to cart 
Wrench set w/pouch, long (7-22mm, 16 pc) All TL-1034 $66.00 add to cart 
Wrench set w/pouch (7-22mm, 15pc) All TL-1035 $40.00 add to cart 
Adj wrench set w/pouch (6, 8, 10, 12 in) All TL-1091 $18.00 add to cart 

Sockets and Ratchets

Note that many sockets are 3/4" drive -- Few tool kits come with 3/4" drive ratchets; a 1/2" -> 3/4" adapter is normally required and available below. [b]Please confirm in the order notes box at checkout that you DO or DO NOT need the 1/2" -> 3/4" adapter. Table updated July 2010
descriptionfitmentpnprice 
55mm Axle Nut Socket 1098/1198/Streetfighter/Multi1200 04-0203 $63.00 add to cart 
Double Sided Axle Nut Socket All single sided swingarm except 1098 04-0202 $72.00 add to cart 
Ergonomic composite 1/2in ratchet All TL-1083 $23.00 add to cart 
Ergonomic composite 3/8" socket ratchet All TL-1084 $20.00 add to cart 
Ergonomic composite 1/4" socket ratchet All TL-1085 $18.00 add to cart 
6mm long allen socket, 3/8" drive All TL-1089 $15.00 add to cart 
8mm long allen socket, 3/8" drive All TL-1090 $16.00 add to cart 
14mm allen socket, 1/2" drive All TL-1036 $22.00 add to cart 
Allen socket set, 3/8 All TL-1037 $21.00 add to cart 
Allen socket set, 3/8" drive (3-8, 10mm, 7 pc), OT All TL-1038 $28.00 add to cart 
Torx bit socket set (T10-T60, 12 pc) All TL-1092 $26.00 add to cart 
1/2 in to 3/4 in adaptor All TL-1042 $9.00 add to cart 
5in extension, 1/2 All TL-1088 $5.00 add to cart 
Adaptor set, 1/4 All TL-1044 $14.00 add to cart 
Breaker bar, 1/2in drive drive, 24in long, Proto All TL-1047 $66.00 add to cart 
21mm socket, 1/2 inch drive All TL-1101 $12.00 add to cart 
22mm socket, 3/4 All TL-1058 $9.00 add to cart 
24mm socket, 3/4 All TL-1059 $9.00 add to cart 
28mm socket, 3/4 All TL-1060 $11.00 add to cart 
30mm socket, 3/4 All TL-1061 $11.00 add to cart 
32mm socket, 3/4 All TL-1062 $11.00 add to cart 
36mm socket, 3/4 All TL-1063 $14.00 add to cart 
41mm socket, 3/4 All TL-1064 $15.00 add to cart 
46mm socket, 3/4 All TL-1065 $19.00 add to cart 
55mm socket, 3/4 All TL-1066 $24.00 add to cart 
1-3/8 inch socket All TL-1098 $10.00 add to cart 
Spark plug socket, 18mm All TL-1067 $8.00 add to cart 
Spark plug socket, 5/8 All TL-1069 $9.00 add to cart 
Note: The large sockets are 12 point and are well made. Due to the size of the fasteners, there is more than twice "overlap" using these sockets between the points of the nut and the socket than on typically sized fasteners 8 to 13mm. Note that these sockets are compatible with Corse and aftermarket nuts with 12 points.

Power Tools

descriptionfitmentpnprice 
1/2" impact, air, 425 ft-lb, Ingersoll Rand (Profe All TL-1070 $172.00 add to cart 
1/2" impact, air, 600 ft-lb, Ingersoll Rand (Profe All TL-1071 $263.00 add to cart 
1/2" impact, cordless, 18v, 240 ft-lb, Chicago Pne All TL-1072 $434.00 add to cart 
1/2" impact, cordless, 19.2V, 240 ft-lb All TL-1073 $353.00 add to cart 
Spare battery for cordless impact All TL-1074 $107.00 add to cart 
1/2" impact, electric, DeWalt (Professional) All TL-1075 $310.00 add to cart 
1/2" impact, electric All TL-1076 $100.00 add to cart 
Butterfly Impact, Astro (Professional) All TL-1077 $73.00 add to cart 

Gloves

descriptionfitmentpnprice 
Mechanix gloves, original style, yellow XL (black All TL-1093 $20.00 add to cart 
Mechanix gloves, original style, red XL (white let All TL-1094 $20.00 add to cart 
Mechanix gloves, original style, black XL (white l All TL-1095 $20.00 add to cart 
Mechanix gloves, FastFit style, red XL (red letter All TL-1096 $15.00 add to cart 

Other

descriptionfitmentpnprice 
Speedymoto Frame Support Service Tool All that use engine as swingarm pivot 04-0201 $99.00 add to cart 

© 2008 ca-cycleworks.com home   shop our catalog   news & blog   policies   privacy   contact