- Fuel: Tanks, Pumps, FCR Carbs, Jet Kits, Air Filters
- Engine Parts and Covers
- Exhaust Systems and Slip-On mufflers
- Chassis: Dampers, Bars, and Rearsets
- Brakes: Rotors, Pads, and Master Cylinders
- Electrical and Ignition
- Final Drive: Chain and Sprockets
- Maintenance Items, Tools, and Chemicals
- Gear, Accessories and Other Bits
- Tools
Stands
| Part | Application | Part No. | Price | .. |
Cycle Cat UCS02 front stand, silver  | All | UCS02-03 | $175 | Add to cart |
Cycle Cat UCS02 front stand, red  | All | UCS02-04 | $175 | Add to cart |
Cycle Cat UCS1 rear stand, silver  | All dual swingarm motorcycles | UCS01-03 | $225 | Add to cart |
Cycle Cat UCS1 rear stand, red  | All dual swingarm motorcycles | UCS01-04 | $225 | Add to cart |
Motorcycles with front fender mountings that wrap around the forks (e.g. Hayabusa) may require removal of the fender prior to use of the UCS2 stand.
Ducati Tools
Information on specialty tools.
| Part | Application | Part No. | Price | .. |
| Crankshaft turning tool | All | 35-5955 | $58 | Add to cart |
| Degree wheel reamed to fit turning tool | All | MP08-092 | $24 | Add to cart |
| 10mm piston Stop for Testa Ducatis | 749-999 | 35-8422 | $35 | Add to cart |
| 12mm piston Stop for Ducatis | All but testa | 35-8424 | $35 | Add to cart |
Clutch holding tool  | All | PC005018 | $29 | Add to cart |
Valve feeler gauges  | All | PC008052-4 | $12 | Add to cart |
Ducati OEM belt pulley tool set  | All | 887.005.644 | $149 | Add to cart |
Motion Pro 18mm spark plug tool  | NGK D8EA | 500-8175 | $19 | Add to cart |
Ducati OEM tool kit, 996  | All Single sided swingarm | 697.200.82B | $31 | Add to cart |
Clearance gauging wax to check squish  | All | wax | $19 | Add to cart |
The clearance gauging wax is .040, .051, and .075.
Books
| Part | Application | Part No. | Price | .. |
Haynes manual (hardbound)  | 1994-2001 Superbikes | HA013756 | $22 | Add to cart |
Haynes manual (hardbound) (updated!)  | 1991-2005 Monster and SS 600,620,750,900 | HA013290 | $29 | Add to cart |
DesmoTimes Desmoquattro  | 4V bikes | dt4vguide | $29 | Add to cart |
DesmoTimes Desmodue guide 2nd Ed  | 2V bikes | dt2vguide | $34 | Add to cart |
The Monster/SS Haynes manual is revised for models up to 2005!!
Aftermarket Maintenance Parts
Replacement items for those needed to perform maintenance.
| Part | Application | Part No. | Price | .. |
Barnett DryFlex clutch, alum plates with new RED material, no springs 527-9MA  | All dry clutch | 460-1505 | $149 | Add to cart |
| Barnett kevlar clutch for wet clutches, no springs 527-10 | All wet clutch | 460-1510 | $149 | Add to cart |
| Clutch throwout bearing | Ducati 6 speed | 6201 | $9 | Add to cart |
| Stainless hex screws for clutch springs (6) | Ducati 6 speed | clutchboltz | $4 | Add to cart |
| this row empty... |
EMS shim kit, 2V  | All 2V except 1000DS | ems2V | $299 | Add to cart |
EMS shim kit, 4V  | DS and 4V | ems4V | $339 | Add to cart |
EMS shim kit, 4V w/opener shims for MBP valve retainers  | DS and 4V | ems4V-mbp | $359 | Add to cart |
| this row empty... |
| Fiber valve cover gaskets (4) | All 2V | SDR-1770Z | $9 | Add to cart |
Cycleworks alternator cover gasket*  | All | SDR-1753Z | $16 | Add to cart |
Oil/clutch engine cover gasket  | All Monster, SS, Superbike | SDR-1835Z | $15 | Add to cart |
K&N oil filter (qty 1)  | All | 556-0036 | $12 | Add to cart |
| this row empty... |
Vacuum fuel pump, square  | Carbed Monster | 002-220 | $27 | Add to cart |
Vacuum fuel pump, round  | Carbed Monster | 002-221 | $37 | Add to cart |
| Wellnuts x8 M6, x24 M5 | ST | wnutST | $48 | Add to cart |
Wellnuts x16  | 900SS CR/SP | m6wellnuts | $24 | Add to cart |
Wellnuts x12  | 748/916/996 | m6wellnuts | $18 | Add to cart |
| Wellnuts x22 M5 | 1999+ Supersports | SSie wellnuts | $33 | Add to cart |
| M8 Flange locking nut for timing belt tensioner (pair) | all 4V | m8locknut | $7 | Add to cart |
Bucci belts, square tooth, not round (each)  | 600/750 2V 1980-1997 | 403-1060 | $18 | Add to cart |
Bucci aftermarket timing belts (each)  | 900 /ST2 2V | 403-1061 | $22 | Add to cart |
| Bucci aftermarket timing belts (each) | 851/888/916/996/pre 2002 748 | 403-1062 | $29 | Add to cart |
Ducati OEM belts (each)  | 620/750/800 1998 up 2V | 737.100.51A | $44 | Add to cart |
| Ducati OEM belts (each) | 1000DS 2003 up 1000DS | 737.402.11A | $55 | Add to cart |
*Alt cover gasket: No more slime!! Note, gasket's .014" thickness will affect sensor air gap on EFI models. Dealer inquiries welcome.
Vacuum fuel pumps: These are not the exact same shape as OEM, but are functionally equivalent. The round pump has a higher flow rate.
Coolant
| Part | Application | Part No. | Price | .. |
| Red Line WaterWetter coolant | All | 220-2000 | $8 | Add to cart |
Suspension Fluid
Red Line synthetic suspension fluids, top quality at a reasonable price. 3 bottles required per bike: just more than one per fork leg.
| Part | Application | Part No. | Price | .. |
| Extra light 2.5wt suspension fluid | All | 220-2072 | $9 | Add to cart |
| Light 5wt suspension fluid | All | 220-2074 | $9 | Add to cart |
| Medium weight 10wt suspension fluid | All | 220-2076 | $9 | Add to cart |
| Heavy weight 30wt suspension fluid | All | 220-2078 | $9 | Add to cart |
| Fork oil level tool | All | 500-8121 | $32 | Add to cart |
| Race Tech 41mm fork seal driver | Monster, SS | TFSD41 | $75 | Add to cart |
| MP 43mm fork seal driver | SSie, Mie, SBK | TFSD43 | $75 | Add to cart |
Red Line synthetic suspension fliuds are mixable to allow the desired, perfect weight.
Brake Bleeder
As used by the pros and mechanics everywhere.
| Part | Application | Part No. | Price | .. |
Mighy Vac brake bleeder  | All | 230-6820 | $35 | Add to cart |
| Mighy Vac Silverline deluxe bleeder | All | 230-6821 | $77 | Add to cart |
Chain Tools
Quality chain tools that you buy for life. If the price is too high for you, go in with some friends or rent them to buddies.
| Part | Application | Part No. | Price | .. |
| 996 tool kit with eccentric chain adjuster | All mono swingarm | 697.200.82B | $31 | Add to cart |
| RK chain breaker and press/riveter | All | RK001000 | $95 | Add to cart |
| this row empty... |
| RK chain tool kit part - tool body - TB4060 | All | RK001001 | $54 | Add to cart |
| RK chain tool kit part - replacement handle - BH4060 | All | RK001002 | $12 | Add to cart |
| RK chain tool kit part - SKH9 cutting pin - CP4050 | All | RK001003 | $14 | Add to cart |
| RK chain tool kit part - cutting pin holder - CP4050H | All | RK001004 | $5 | Add to cart |
| RK chain tool kit part - cutting pin pressure bolt - PB4050 | All | RK001005 | $12 | Add to cart |
| RK chain tool kit part - flare pin - FP5060 | All | RK001006 | $7 | Add to cart |
| RK chain tool kit part - flare pin pressure bolt - PB4060 | All | RK001007 | $19 | Add to cart |
| RK chain tool kit part - clip plate holder - PH4060C | All | RK001008 | $14 | Add to cart |
| RK chain cutter/press-fit tool kit - rivet plate holder - PH5060R | All | RK001009 | $14 | Add to cart |
| RK chain tool kit part - tail piece for cutting - TP4050 | All | RK001010 | $6 | Add to cart |
| RK chain tool kit part - tail piece for press fit - TP4060 | All | RK001011 | $5 | Add to cart |
| RK chain tool kit part - black logo box - BX4060 | All | RK001012 | $10 | Add to cart |
Repsol Products
Buy 4 liters of Repsol oil and receive a free Respol t-shirt (large size only).
| Part | Application | Part No. | Price | .. |
Repsol moto oil 4T Synthetic 10W-40 4 liter  | All | 351-1002 | $26 | Add to cart |
Repsol moto oil 4T Synthetic 10W-40 1 liter  | All | 351-1001 | $7 | Add to cart |
Repsol moto oil 4T Racing 10W-50 4 liter  | All | 351-1006 | $42 | Add to cart |
Repsol moto oil 4T Racing 10W-50 1 liter  | All | 351-1005 | $11 | Add to cart |
Repsol moto brake fluid DOT4 6.7 oz  | All | 351-1023 | $4 | Add to cart |
Repsol chain lube 5.07 oz  | All | 351-1007 | $4 | Add to cart |
|
|