- Fuel: Tanks, Pumps, FCR Carbs, Jet Kits, Air Filters
- Engine Parts and Covers
- Exhaust Systems and Slip-On mufflers
- Chassis: Dampers, Bars, and Rearsets
- Brakes: Rotors, Pads, and Master Cylinders
- Electrical and Ignition
- Final Drive: Chain and Sprockets
- Maintenance Items, Tools, and Chemicals
- Gear, Accessories and Other Bits
- Tools
Anything for sale on this web page that alters your fuel mixture is considered altering your
emissions equipment, which may be illegal in your location! In CA, these items are
intended for off road or closed competition use.
MH900e Fuel Tank Kit
For more information, please read our MH900e fuel tank page. Dealer inquiries welcome.
| Part | Application | Part No. | Price | .. |
5.1 gallon endurance tank  | MH900e | MH_Tank | $899 | Add to cart |
EFI Fuel Pump
After failing to find a reasonable replacement for the costly OEM Ducati fuel pump, we commissioned these pumps to be made for us! Exact replacement for all "holster type" fuel pumps on Ducatis with the fuel pump flange plate. Exact replacement for these Ducati models: MH900e (all years), S2R1000, S2R800, 999, 749, Multistrada MTS, Hypermotard HM, S4Rs. Also compatible with all "metal tank" Monsters and SSie models (the OEM pump has shorter length but is not a problem because the pump is clamped along the body). Standard pump designed for use at 3.5 bar (Ducati spec), while HP pump is 4.5 bar for use on racing engines with modified pressure valves. Buy a pump with one of our tanks and the pump is half off. Dealer inquiries welcome.
| Part | Application | Part No. | Price | .. |
| efi Fuel Pump | Most 2000+ | FP-DUC | $149 | Add to cart |
| efi Fuel Pump, hi-pressure | Most 2000+ | FP-DUC-HP | $189 | Add to cart |
Keihin FCR Carb Kit from Sudco
All FCR kits are checked to ensure the proper baseline is set before shipping to you. ground shipping is approx $14 and 3 Day Select is $20-$25.
Please read the Ducatitech FCR FAQ.
A ball hex driver is required for the hex bolts that hold the airbox adapters to the carbs.
The FCR singles require the purchase of airbox adaptors, below.
Consumer Alert:Ca Cycleworks customers have warned us about some "special deals" on the Internet for what would appear to be a full FCR kit, when said kits are without instructions, throttle, or cables (and at least once the manifold adaptors, too!). This requires another $80-$160 of parts to properly install these incomplete kits. All FCR kits sold by Ca Cycleworks are shipped complete with carbs, cables, throttle, spigots, airbox adaptors, instructions, and air filter. All Ca Cycleworks FCR kits are verified to ensure the proper baseline settings. For those who purchase incomplete kits used or from other vendors, Ca Cycleworks can supply you with the support you need: proper replacement parts shown below, copies of Sudco instructions, and Ca Cycleworks "install hints."
FCR Parts
We support what we sell. Did you purchase an incomplete kit elsewhere? These are replacement parts you need to complete the kit or to make it as good as new.
| Part | Application | Part No. | Price | .. |
| Cables for SS FCR kit | SS | 500-1425 | $40 | Add to cart |
| Cables for Monster FCR kit | Monster | 500-1610 | $40 | Add to cart |
| Throttle tube and housing for FCR kit | SS, Monster | 500-1073 | $39 | Add to cart |
| Throttle tube only for FCR kit | Monster, SS | 500-1090 | $5 | Add to cart |
| Airbox adaptors, 62mm for FCR kit, pair | SS, Monster OE airbox | 021-212 | $78 | Add to cart |
| Airbox adaptors, 68mm for large filters, pair | Large individual filters | 021-215 | $78 | Add to cart |
Air/Fuel Ratio Monitor
Know the true results of your last jetting change.
| Part | Application | Part No. | Price | .. |
| K&N air/fuel ratio monitor with O2 sensor | All | KL35-3189 | $225 | Add to cart |
| K&N air/fuel monitor w/O2 sensor (pair) | All | KL35-3189 | $399 | Add to cart |
Air Filters
| Part | Application | Part No. | Price | .. |
| K&N air filter DU-0900 | Monster, SS, 851/888 pre 2002 | DU-0900 | $49 | Add to cart |
| K&N air filter DU-9098 | ST | 556-4260 | $55 | Add to cart |
| K&N air filter DU-9001 | S4, Monster 620/750/800/1000, S2R, S4R | 556-9001 | $57 | Add to cart |
| K&N air filter DU-1104 | Multistrada | 556-1104 | $66 | Add to cart |
| K&N pod filter, injected 2V bikes (pair) | SS-efi | 005-173 | $82 | Add to cart |
| K&N pod filter, for FCRs / CVs ru1750 (pair) | Carbed 2V | 005-176 | $82 | Add to cart |
When fitting the pods to carbureted Monsters and SS's, you get rid of the airbox. There are things mounted on that airbox. You do the math.
Factory (Brand) Jet Kits
These feature hex head screws and titanium needles.
| Part | Application | Part No. | Price | .. |
| Factory Pro titanium kit | 900SS | D09-1.1-Ti | $89 | Add to cart |
| Factory Pro titanium kit | Monster 900 | D12-1.1-Ti | $89 | Add to cart |
| Factory Pro titanium kit | Monster 750 | D08-1.1-Ti | $89 | Add to cart |
| Factory Pro titanium kit | Monster 600, SS | D06-1.1-Ti | $89 | Add to cart |
| Factory Pro needle jets (sold each) | Carbed Monster, SS | CRZ-EMU-100120K | $25 | Add to cart |
Quick Link: Factory Pro Tuning
|
|
